raspberry pi zero camera cable installation

Open a terminal and run either to see a list of available commands (or the original documentation is here). Two command-line tools are provided to access the camera module - these are raspivid and raspistill. Set the settings or eat humble Pi Taking photos with the Raspberry Pi Hold the ribbon square in place and push the clips down to fix the ribbon in position. You need to place the ribbon with the conducting edge-connection pointing away from the Ethernet port and towards the power-connector end of the Pi. It's a zero insertion force (ZIF) design pull up the two side clips to release the retaining bracket. The dedicated camera bus is the ribbon connector closest to the Ethernet port. If that's not an issue, we can cover the hardware installation. The camera module requires the Raspian OS to be updated to the latest version, so it can install the driver and tools required. Say cheesy for Wheezyīefore moving on, you'll need an internet connection. The default username and password are 'pi' and 'raspberry' respectively.

Plug everything into the Raspberry Pi and boot with the SD card.Ĭhoose to install the standard Raspbian 'Wheezy' OS, reboot and you're done. Take your SD card, download the NOOBS Zip file and extract it to the SD card - if needed, format your card using the official SD tool.

Raspberry pi zero camera cable installation